We are a commune of inquiring, skeptical, politically centrist, capitalist, anglophile, traditionalist New England Yankee humans, humanoids, and animals with many interests beyond and above politics. Each of us has had a high-school education (or GED), but all had ADD so didn't pay attention very well, especially the dogs. Each one of us does "try my best to be just like I am," and none of us enjoys working for others, including for Maggie, from whom we receive neither a nickel nor a dime. Freedom from nags, cranks, government, do-gooders, control-freaks and idiots is all that we ask for.
- Ethanol-free gas (100% gasoline) for power tools is now available in some Home Depots
- For smaller trees and stumps, cut them to ground level with a reciprocating saw. I have a cordless Sawzall (wonderful tool), but the thought never occurred to me to do that. Chain saws can never touch dirt, but a Sawzall don't care.
Didn't know you were looking for something to cut into the dirt.
I removed a tree this weekend and used a Sawzall to cut out the roots, rather than renting a stump grinder.
Stump grinders work great on larger trees. This one was about 30/40 feet tall and 6-7 inches diameter. Easier to cut it down low, then go after the roots with a Sawzall than going out and getting the stump grinder.
Stroll over to your 5 gallon plastic bucketful of soapy water, and dip the bar into it, taking care to keep the nose off bottom. Run it up for a few seconds (enjoy the pretty plume of water you kept to the side of).
Proceed as normal; your bar oiler will re-lube in no time, and your running parts will be sparkling clean.
You can scissor off the dome of a gallon milk jug, or anything plastic that will let you submerge the bar a few inches. Run 'er up fast, so the water resistance on the dirt is working for you. Soapy is optional, plain water will de-grit almost as well, just run it a little longer, & quit by visual check.
I bought a reciprocating saw to use on automobile exhaust systems. It makes quick work of those rusty nuts, bolts and pipes. It's almost as good as a cutting torch and a heck of a lot cheaper. I never thought of using it on trees but I am going to try it.
Amen to that. I found several stations in my area with ethanol free gas on pure-gas.org and will go out of my way to patronize them, even for my 2010 truck which will burn the E10 junk. One has all three grades ethanol free and is priced right in line with the stations selling E10. I usually keep a couple of 5 gallon cans at home for the yard tools. I put Sta-Bil or Startron in my stored gas to eliminate condensation problems.
I wish I'd known (or, more accurately perhaps, researched more or been more creative) about this two summers ago. I took out a LOT of overgrown landscaping (mostly juniper bushes and pine trees) and took the stumps out by hacking the roots with a good ol' fashioned pickaxe.
If only... I've read somewhere, long ago, that the human brain cannot "remember pain". I can remember that pain, lemme tellya.
I'll be stopping but Sears this weekend to pick up some of those pruning blades for the reciprocating saw.